IOS software
4 posters
Page 1 of 1
IOS software
I couldn't connect the formaker with my macbookAir...
I couldn't install the softwares(replicatorG, inkspace etc...) they sent us on my IOS computer...
Is there anyone can help me?
I couldn't install the softwares(replicatorG, inkspace etc...) they sent us on my IOS computer...
Is there anyone can help me?
asefi- Junior Member
- Posts : 7
Join date : 2016-02-13
Re: IOS software
I hope this helps:
https://www.lulzbot.com/learn/tutorials/cura-lulzbot-edition-installation-osx
http://www.makerbot.com/desktop
https://www.lulzbot.com/learn/tutorials/cura-lulzbot-edition-installation-osx
http://www.makerbot.com/desktop
Mikael- Life Member
- Posts : 74
Join date : 2016-03-08
Re: IOS software
I installed CURA, Inkscape and ReplicatorG on OSX without problems. But I'm just working with the SDcard - no direct USB connection.
CURA: https://ultimaker.com/en/products/cura-software
ReplicatorG: http://replicat.org/download
Inkscape: https://inkscape.org
Only missing piece of Software it the CTC_TG tool to convert GCode/NC file. Wine is not working in that case so I am using a Windows VM.
I already ask CTC if they can release an OSX Version or share the source code. Waiting for reply.
Regards,
Gregster
CURA: https://ultimaker.com/en/products/cura-software
ReplicatorG: http://replicat.org/download
Inkscape: https://inkscape.org
Only missing piece of Software it the CTC_TG tool to convert GCode/NC file. Wine is not working in that case so I am using a Windows VM.
I already ask CTC if they can release an OSX Version or share the source code. Waiting for reply.
Regards,
Gregster
gregster- Member
- Posts : 22
Join date : 2016-02-12
Re: IOS software
I would not use the USB if I was you.
There is a very bad fire hazard with it.
There is a very bad fire hazard with it.
Mikael- Life Member
- Posts : 74
Join date : 2016-03-08
Re: IOS software
thank you.
I will try it and feedback you
I will try it and feedback you
asefi- Junior Member
- Posts : 7
Join date : 2016-02-13
Re: IOS software
if you receive any answer about that please share with us under this topic @gregster
asefi- Junior Member
- Posts : 7
Join date : 2016-02-13
CTC-TG on mac
Hi,
I posted a link to a wine version of CTC-TG for mac I bottled yesterday.
It's working on my machine so you could give a try..
regards,
I posted a link to a wine version of CTC-TG for mac I bottled yesterday.
It's working on my machine so you could give a try..
regards,
mathvm- Junior Member
- Posts : 2
Join date : 2016-06-16
Similar topics
» Included software first impression
» MakerBot Software latest version
» Open Source software recommendation
» ReplicatorG Software: Translation/Config Needed
» MakerBot Software latest version
» Open Source software recommendation
» ReplicatorG Software: Translation/Config Needed
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
Fri Dec 01, 2017 8:10 am by sid
» Formmaker for sale for parts
Mon Feb 20, 2017 3:40 pm by Seniorgeek
» Crap machine
Mon Feb 20, 2017 3:34 pm by Seniorgeek
» Upgrade Formaker
Wed Feb 01, 2017 8:51 am by Mikael
» Incorrect dimensions after printing
Wed Feb 01, 2017 8:36 am by szalap
» Heat bed temperature incorrect
Tue Nov 22, 2016 7:01 pm by CKAFamily
» Timing pulleys for Formaker
Thu Nov 17, 2016 9:25 am by szalap
» Heat Bed Resistance
Thu Nov 03, 2016 5:33 pm by CKAFamily
» Replacement power supply
Wed Oct 05, 2016 4:28 pm by Seniorgeek