Laser Issue
2 posters
Page 1 of 1
Laser Issue
Hello All,
I have been in contact with CTC regarding the known Laser issue.
They told me that the issue with the Laser was grounding.
The Laser connected was possibly grounded to the Chassi by mistake.
The way to fix this according to CTC is to make sure the connector is NOT grounded or electrically connected to the Chassi via the screws.
Here is an image of how the laser connector Should look like. If you have any other bushings then replace them with Non-Conducting ones.
http://www.combomakers.com/images/laser1.png
I have been in contact with CTC regarding the known Laser issue.
They told me that the issue with the Laser was grounding.
The Laser connected was possibly grounded to the Chassi by mistake.
The way to fix this according to CTC is to make sure the connector is NOT grounded or electrically connected to the Chassi via the screws.
Here is an image of how the laser connector Should look like. If you have any other bushings then replace them with Non-Conducting ones.
http://www.combomakers.com/images/laser1.png
Last edited by Mikael on Sat Apr 23, 2016 2:35 pm; edited 1 time in total
Mikael- Life Member
- Posts : 74
Join date : 2016-03-08
Re: Laser Issue
Thanks for sharing, I'll definitely check this one today, just to not forget before laser printing. Can you also reupload the photo? I cannot get to it, it throws 404 at me.
szalap- Senior Member
- Posts : 34
Join date : 2016-01-06
Re: Laser Issue
Safe here, I have the red washers between screws and PCB.
szalap- Senior Member
- Posts : 34
Join date : 2016-01-06
Similar topics
» Formaker laser works but won't fire...
» laser firing issue
» how to use laser
» testing laser
» Laser Test and question
» laser firing issue
» how to use laser
» testing laser
» Laser Test and question
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
Fri Dec 01, 2017 8:10 am by sid
» Formmaker for sale for parts
Mon Feb 20, 2017 3:40 pm by Seniorgeek
» Crap machine
Mon Feb 20, 2017 3:34 pm by Seniorgeek
» Upgrade Formaker
Wed Feb 01, 2017 8:51 am by Mikael
» Incorrect dimensions after printing
Wed Feb 01, 2017 8:36 am by szalap
» Heat bed temperature incorrect
Tue Nov 22, 2016 7:01 pm by CKAFamily
» Timing pulleys for Formaker
Thu Nov 17, 2016 9:25 am by szalap
» Heat Bed Resistance
Thu Nov 03, 2016 5:33 pm by CKAFamily
» Replacement power supply
Wed Oct 05, 2016 4:28 pm by Seniorgeek