[Thingiverse] Filament spool holder
2 posters
Page 1 of 1
[Thingiverse] Filament spool holder
I've found this cool and useful project by Kpafuca, who owns CTC 3D Printer, so the parts should fit in nicely, though I haven't printed it yet to make sure:
[url=http://www.thingiverse.com/thing:918137][/url]
http://www.thingiverse.com/thing:918137
It should help everybody to compress workspace a bit and keep the spool firm on the printer itself.
[url=http://www.thingiverse.com/thing:918137][/url]
http://www.thingiverse.com/thing:918137
It should help everybody to compress workspace a bit and keep the spool firm on the printer itself.
szalap- Senior Member
- Posts : 34
Join date : 2016-01-06
Re: [Thingiverse] Filament spool holder
Hey, thank you for the design but this does not fit on our formaker.
It is designed for the wooden frame which has different size and slight differences so it does not fit. The Thickness of our formaker metal is roughly 1.5mm + coating so ~ 1.6-1.7mm
I am currently printing my own designed filament spool holder for the formaker. When i have tested this one i will upload it and share with you!
It is designed for the wooden frame which has different size and slight differences so it does not fit. The Thickness of our formaker metal is roughly 1.5mm + coating so ~ 1.6-1.7mm
I am currently printing my own designed filament spool holder for the formaker. When i have tested this one i will upload it and share with you!
TobiWan- Member
- Posts : 20
Join date : 2016-01-08
Age : 37
Location : Germany
Re: [Thingiverse] Filament spool holder
You're right, I've been so glad I've found it, that I didn't even check specifics - thanks for pointing it out so quickly .
And awesome, I've wrote this post, at least I'll be able to try out something in the end - looking forward to see your project and thanks again!!!
You're planning to place the holder in the same fashion as Kpafuca or along side?
And awesome, I've wrote this post, at least I'll be able to try out something in the end - looking forward to see your project and thanks again!!!
You're planning to place the holder in the same fashion as Kpafuca or along side?
szalap- Senior Member
- Posts : 34
Join date : 2016-01-06
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
Fri Dec 01, 2017 8:10 am by sid
» Formmaker for sale for parts
Mon Feb 20, 2017 3:40 pm by Seniorgeek
» Crap machine
Mon Feb 20, 2017 3:34 pm by Seniorgeek
» Upgrade Formaker
Wed Feb 01, 2017 8:51 am by Mikael
» Incorrect dimensions after printing
Wed Feb 01, 2017 8:36 am by szalap
» Heat bed temperature incorrect
Tue Nov 22, 2016 7:01 pm by CKAFamily
» Timing pulleys for Formaker
Thu Nov 17, 2016 9:25 am by szalap
» Heat Bed Resistance
Thu Nov 03, 2016 5:33 pm by CKAFamily
» Replacement power supply
Wed Oct 05, 2016 4:28 pm by Seniorgeek